2RU Boosters
MPB Communications' 2RU-P Series consists of high power boosters that provide up to 30 dBm of output power. They are available in the C- or L-bands, or for narrow band WDM applications.
Features
- Fiber integrity monitor with automatic safety shut-down and restart
- Easy to use web-based Craft Terminal for control and monitoring
- Integrated Ethernet port for remote management
- Control in either Automatic Power Control (APC) or Automatic Gain Control (AGC) mode
- Bit rate independent
- SNMP interface
2RU High Power Boosters
2RU-N-PY30
MPB’s 2RU-PY30-Series High-Power Booster is designed to provide a cost-effective solution to increasing transmission system capacities.
With an operational output power range from 18 to 30 dBm, the 2RU-PY30 series boosters allow the user to provide for gradual capacity upgrades starting from as little as a single channel and progressing to full DWDM channel loading across the 1536 to 1568 nm band. The boosters feature a mid-stage Variable Optical Attenuator (VOA) to provide adjustable negative gain tilt pre-emphasis as the channel count increases and a Gain Flattening Filter (GFF) to ensure low gain ripple over the amplifiers’ operational band.
| PY30F-S | PY30F | ||
|---|---|---|---|
| Spectral Range | 1536 - 1568 | 1536 - 1568 | nm |
| Output Power Range | 18 - 30 | 18 - 30 | dBm |
| Power Stability | ± 0.5 | ± 0.5 | dB |
| Input Power Range | -9 to +7 | +1 to +15 | dBm |
| Optimum Gain | 23 to 25 | 14 to 16 | dB |
| Negative Gain Tilt Range | 5 to 15 over output power range | dB | |
| Signal Input | SC Optical Connector | ||
| Signal Output | SMF-28 Armored Fiber with E-2000-PS High Power Connector | ||
| OSC Wavelength | 1574 | nm | |
2RU Boosters
2RU-N-P21F, P24F, P26F, P30F
The 2RU-PxxF series high-power booster amplifiers are designed to provide a cost-effective solution to increasing transmission system capacities.
At their nominal gain, the boosters provide gain-flattened amplification over the full C-band (1530 to 1565 nm) in the case of the P21F and P24F and the extended C-band (1528 to 1569 nm) for the P26F and P30F.
With output power operating ranges up to 20 dB, the 2RU-PxxF boosters allow the user to provide for gradual capacity upgrades starting from as little as a single channel and progressing to full DWDM channel loading across the amplifiers’ operational bands.
| P21F | P24F | P26F | P30F | |||
|---|---|---|---|---|---|---|
| Operational Spectral Range | 1530 - 1565 | 1530 - 1565 | 1528-1568 | 1529-1569 | nm | |
| Composite Output Power for Flat Gain | 15 - 21 | 18 - 24 | 20-26 | 10-30 | dBm | |
| Power Stability | ± 0.5 | ± 0.5 | ± 0.5 | ± 0.5 | dB | |
| Composite Input Power for Flat Gain | 1 to 7 | 3 to 9 | 5 to 11 | -13 to +7 | dBm | |
| Optimum Gain | 13.5 to 14.5 | 14.5 to 15.5 | 14.5 to 15.5 | 22-24 | dB | |
| Negative Gain Tilt with Optimum Gain and +30 dBm Output Power | 6 to 16 | dB | ||||
| Noise Figure at Optimum Gain | ||||||
| with 7 dBm Input Power | 6.0 | - | - | - | dB | |
| with 9 dBm Input Power | - | 6.0 | - | - | dB | |
| with 11 dBm Input Power | - | - | 7.5 | - | dB | |
| with 7 dB Input Power and | ||||||
| with -6 dB Gain Tilt | 7.5 | dB | ||||
| with -11 dB Gain Tilt | 10 | dB | ||||
| with -16 dB Gain Tilt | 16 | dB | ||||
| Signal Input | SC Optical Connector | |||||
| Signal Output | SC Optical Connector | SMF-28 Armored Fiber with E-2000-PS High Power Connector | ||||
| OSC Wavelength | 1574 | nm | ||||
MPB Communications can provide an unbiased third party opinion on the "best" network solution. For information on link optimization, network cost benefit analysis, system design, or system engineering, contact info@mpbc.ca