RMH6000 ROPA Pumps

RMH6000MPBC's ROPA pumps are high power lasers that provide pump power for a Remote Optically Pumped Amplifier (ROPA).

All of MPBC's ROPA pumps are equipped with OSC coupling optics to seamlessly incorporate the FIM module for Hazard Level 1M operation.

With built-in redundancy and soft failure protection, MPBC ROPA Pumps provide the ultimate in terms of performance and reliability for ultra-long spans where in line amplifications is not practical or not desirable.

Cascaded ROPA Pumps (CRP)

MPBC's patented 3rd Order Cascaded ROPA pumping scheme is an enhanced technique used for providing improved ROPA pump delivery by pumping the signal fiber with a shorter wavelength than the desired ROPA pump wavelength, and then using the transmission fiber media as a wavelength converter that uses the Raman effect to generate the ultimate ROPA pumping wavelength.

MPBC's Cascaded ROPA pumping scheme allows for the longest repeaterless spans. It also provides up to 2.5 dB more pump power delivered to the ROPA when compared to a direct pump.

The Cascaded ROPA pumping scheme also provides a broader and flatter gain than direct delivery ROPA pumps. Cascaded ROPA pumps are available with output power powers to 6.5 watts, depending upon the transmission fiber type and the placement of the ROPA.

RMH6000-

CRP-4000-1420/1485

CRP-5000-1420/1485

CRP-6500-1420/1485

 
Max Output Power 4 5.0 6.5 W
Output Wavelengths 1420 & 1485 1420 & 1485 1420 & 1485 nm
Fiber Integrity Monitor (OSC): 1610 nm

Conventional ROPA Pumps (RFL)

The Conventional ROPA pumps are high power 1st order fiber laser sources used to pump Remote Optically Pumped Amplifiers (ROPA).

Conventional ROPA pumps are available with output power powers to 2 watts.

 

RMH6000-

RFL-1000-148x

RFL-1500-148x

RFL-2000-148x

 
Max Output Power 1.0 1.5 2 W
Output Wavelength 148x nm
Fiber Integrity Monitor (OSC): 1610 + 1574 nm

 

Semi-conductor ROPA Pump (LDP)

The LDP-500 ROPA pump is a solution for when <1 W of pump power is required for a Remote Optically Pumped Amplifier (ROPA).

This unit is a microprocessor-based PIU equipped with OSC coupling optics for Hazard Level 1M operation.

RMH6000-

LDP-500-1480

 
Total Output Power 500 mW
Output Wavelength 1480 nm
Fiber Integrity Monitor (OSC): 1610 nm

MPBC can provide an unbiased third party opinion on the "best" network solution. For information on link optimization, network cost benefit analysis, system design, or system engineering, contact info@mpbc.ca

RMH6000

 

© 2017 MPB Communications Inc. • 147 Hymus Boulevard, Montreal, Quebec H9R 1E9 • info@mpbc.ca
All specifications subject to change without notice.